Cutting the First Stripe
The method of “cutting” the first stripe, used when a flag has been folded many, many times and is now stretched out to where it will not end up positioned properly for the tuck at the end, creates a very small initial triangle helping create more cloth for later folds.
Here is what the flag looks like before the triangle folds. The small fold to the left is only to show the two horizontal folds.
Pulling the Inside
At the last fold into the blue, which should look like the picture below, if the tip does not fall into the space within the two lines, it may be difficult to tuck at the end of folding.
If the tip does not fall in between those lines, back up one fold, pull the inside folds forward and continue. If the tip comes nowhere close to the blue, as pictured below right, accomplish the same procedure, without backing up a fold.
After finishing the triangle folds, make the last fold at an angle to give the right corner a little more cloth to tuck. It works very, very well for most every flag.
If you follow this blog, you know that I have tons of free resources as far as information in the articles and also downloadable content on the Downloads page. Well, here is another!
Click the link above to go to the Downloads page, scroll down to Law Enforcement and there you will find a PDF package that outlines a complete tetrad (4- or 5-man) exhibition routine! The rifle work is included in the form of YouTube links on each page! Granted, the rifle work is quite basic, but I wrote this for a sheriff’s office in Colorado who lost a member of their team and wanted to represent him at Police Week in Washington DC. It wasn’t designed to win first place at a world-class event, it was designed to help some grieving law enforcement officers represent a fallen brother.
Anyone can use this routine either as their own complete routine or as a primer to stimulate their creativity. It’s given to you free of charge, you may perform all, some or none of it!
A short time ago, Leslie Savard Hamud sent a question to me through my facebook page, The Honor Guard Manual. To me, the question a little cryptic and out of left field- but I really enjoy left field questions! Here is how the conversation went:
Leslie: Hello, I am the daughter of Al Savard and my dad is a proud man so we do not hear much of the honor guard. I would love some information of the Savard Manual if anyone could share with me this I would be grateful. I’m very proud of my dad and the man he is. Thank you for all that you have done for our country we have many people and blessings to be grateful for.
DrillMaster: Unfortunately, I do not know anything about a Savard Manual and cannot find any information on it. If you can point me in the right direction, I may be able to obtain something for you. Us the manual for honor guard units? Is geared toward the military, law enforcement, firefighters, or fraternal organizations?
Leslie: My dad was stationed at the Tumb of the Unknown Soldier in Washington DC around 1956 and he has apparently created a maneuver and it is referred to as the Savard Manual or close to this. Thank You for your time I appreciate it.
DM: Oh, I see! Alright, I’ll check into this. I’m thinking that what your father created is a process for the Tomb Guard to manipulate the rifle, what we call a “manual”, as in the manual of arms. I’ll get back to you!
This was the information I needed! I posted a question on the Facebook page, The Old Guard (TOG) asking for any available information on some sort of printed manual. A couple of TOG members told me that nothing is written, the manuals are handed down to the next generation. Another TOG member gave me Mr. Savard’s page on Tombguard.org. He is listed as a Founding Father for the Tomb Guard Society and was possible one of a team of Soldiers, or maybe even “the one”, who developed the manuals that the Sentinels and Drill Team use to this day with modifications here and there.
I passed the information on to Leslie and asked if I could write an article and if Leslie had some pictures of her father.
Leslie: Wow Thank You you have pulled up a lot of information. What does Founding Father mean in terms of the guard? I will see if I can find an old picture of him at the Tomb that would be great and such an honor to him. I really appreciate your time.
I still needed more information and thought I might turn to a friend of mine who was a previous senior soloist on the Old Guard, Andres Ryan. Here is where the final puzzle pieces fell into place!
DM: Andres, do you know of a Savard Manual?
Andres: Yes, there is a Savard and a Hidden Savard. It’s a transition maneuver that takes you from either Order to a Prep Position for the 1.5 throw, or the Hidden Savard that takes you to the Inverted Carry. These are Army Drill Team maneuvers. Actually, one of those tricks you have to learn during the Annual Training Cycle . It’s kinda tricky. You would have to watch it in slow motion a lot to actually understand what’s going on because its like a Half Spin-Out and then Half Spin-In right when you reach Full Extension. The technique is something we referred to as “Playing the Fiddle”.
DM: Mr. Savard was a Sentinel, why does the Drill Team use his moves?
Andres: Back then, the Tomb Sentinels all marched on the Drill Team, that was the standard in those days. I don’t know if he made the technique but its really cool if that’s the legacy he left. One of those moves takes forever to wrap your head around in the Cycle.
Thank you Ryan and the others who had a hand in finding the answer for the proud daughter of a US Army Soldier.
At ceremonies across the country, many local municipalities request a color team from military installations or even first responders. Quite often, music is not available so those gathered recite the Pledge of Allegiance. The picture above is from nba.com.
Here is how to do it:
The MC says something like this. “Ladies and gentlemen, please rise for the presentation [or posting*] of the colors.”
Color team enters as usual and stops centered in front of the audience.
The commander of the color team gives the loud command, “Present, ARMS!”
The MC, or a designated person steps up to the microphone and says something like, “Ladies and gentlemen, please join me in reciting the Pledge. I pledge…”
The commander of the color team gives the command, “Port, ARMS!” and the color team [posts the colors and then] departs.
*Only post the colors for more ceremonial occasions.
That is it. Color team commanders, please do not order the audience to begin, it is not your place.
When executing facing movements while armed with a rifle, do not break vertical. But, what does that mean?
In Regulation Drill, drill that is based on the drill and ceremonies manual for each military service, without any added movements whatsoever, Drillers must execute the movements exactly as described.
The preparatory commands for facing movements are Right, Left and About. Do not lift the rifle off the marching surface on the preparatory command. Accomplish that only right after the command of execution, Face, while executing the first count of the movement (see the pictures, above).
When you move, the rifle must remain vertical, lift it just enough to clear the ground/deck and move it to directly next to the right foot on the second count of the movement.
A light blue flag with gold fringe bearing thirteen white stars in a configuration as on the Medal of Honor ribbon.
The light blue color and white stars are adapted from the Medal of Honor ribbon. The flag commemorates the sacrifice and blood shed for our freedoms and gives emphasis to the Medal of Honor being the highest award for valor by an individual serving in the Armed Forces of the United States.
Public Law 107-248, Section 8143, legislated the creation of a Medal of Honor Flag for presentation to each person to whom a Medal of Honor is awarded after the date of the enactment, October 23, 2002. A panel of eight members made of representatives from each Service (Army, Navy, Marine Corps, Air Force and Coast Guard), one Office of Secretary Defense staff, one historian and one representative from the Medal of Honor Society was formed to review and evaluate all designs submitted and make a final recommendation to the Principal Deputy to the Under Secretary of Defense for Personnel and Readiness. On 15 December 2004, the design submitted by Ms. Sarah LeClerc, Illustrator at The Institute of Heraldry was approved.
Public Law 109-364, Section 555, titled “Authority for Presentation of Medal of Honor Flag to Living Medal of Honor Recipients and to Living Primary Next-of-Kin of Deceased Medal of Honor Recipients,” dated October 17, 2006, established authority to award the Medal of Honor Flag, upon written request therefor, to the primary next of kin, as determined under regulations or procedures prescribed by the Secretary of Defense, of deceased Medal of Honor Recipients.