If you are between the ages of 12 and 17 (high school seniors are welcome), in any kind of cadet program and have a desire to learn the tasks of America’s military honor guards, Millersburg, KY is the place to be from July 27th to August 9th. Why? Because these 2 weeks are the Cadet Joint Service Honor Guard Academy! The academy is taught by The DrillMaster and hosted by Forest Hill Military Academy which turns into the National Cadet Training Center during the summer where cadets from all over the world meet to attend many varied Military Adventure Camp courses:
COURSES (First Time Attendees):
Basic Cadet Training – Session 1 June 29 – July 12
Basic Cadet Training and Tactical Leader Course June 29 – July 26
Basic Cadet, Tactical Leader, and Cad. Mil. Combatives Prog. June 29 – August 2
Basic Cadet, Tactical Leader, and Cadet MP Academy June 29 – August 9
Basic Cadet Training – Session 2 July 13 – 26
Basic Cadet and CMCP Week July 13 – August 2
Basic Cadet and Cadet MP Academy July 13 – August 9
COURSES (Returning Attendees):
Cadet Tactical Leader’s Course July 13 – 26
Cadet Tactical Leader’s Course and CMCP July 13 – August 2
Cadet Tactical Leader’s Course and Cadet MP Academy July 13 – August 9
Cadet Advanced Leader’s Course June 6 – 26
Cadet Ranger Challenge (CRS prerequisite)(15 y/o+) June 22 – July 12
Cadet Ranger School July 13 – August 2
Cadet Combat Engineer School June 22 – July 12
Cadet Combat Support Schools June 22 – July 12
Cadet Ranger Challenge and Cadet Ranger School June 22 – August 2
Cadet Military Police (MP) Academy July 27 – August 9
Cadet Joint Honor Guard Academy July 27 – August 9
Cadet Military Combatives Program (CMCP) July 27 – August 2
I hope to see you around the campus!
honor guard training, cadet honor guard, air force, army, navy, marine corps, coast guard, sea cadets, young marines, civil air patrol, cap, honor guard, color guard, funeral detail, pall bearers, pallbearers, firing party, color team, posting the colors, presenting the colors
The DrillMaster is the military drill world’s education and training specialist writing the only books for the military drill world including a comprehensive manual for honor guards and a complete manual on how to properly judge military drill competitions.
The DrillMaster trains military-type drill teams, Drillers and honor guard units.
Drill team training, honor guard training, color guard training, color team training, drill team, drill competition, drill meet, exhibition drill, precision drill, fancy drill, freestyle drill, colorguard, color team, honor guard, explorer post, scout, jrotc, young marines, civil air patrol, cap, army cadets, sea cadets, world drill association, training, firefighter, police, merchant marines, JROTC, junior guard
The term, poromeric, refers to a class of breathable synthetic leather.
Corfam (not “Corfram,” “Clorfam” or Clorfram”) is made by the DuPont Chemical Company.
Clarino, manufactured by the Kuraray Company, is another synthetic high-shine leather found mostly in flagstaff harnesses.
Patent Leather, first created in England in the late 1700s, gained popularity after inventor Seth Boyden of Newark, New Jersey created his own version with linseed oil.
Whatever you wear of what is mentioned above, it’s all synthetic resins of plastics.
Pros: Never shine shoes again! Just keep the heel sole, and welts black with high-gloss edge dressing. You do not “shine” poromeric leather shoes, you clean them. Cons: They can get HOT! If you are facing the sun for a long time, you may need to treat the tops of your toes for burns. Really. Wear two layers of thin dress socks or a thicker dress sock to protect your feet.
Note: to clean poromeric shoes and equipment that have scuffs or run marks, use Brasso.
Shining Standard Leather Shoes/Boots
They can be tough to shine but, polish, a little water, cotton balls or an old cotton t-shirt are perfect for making leather shoes like mirrors.
Brand new leather shoes are perfect for shining. Sometimes there is an oil coating on the shoes that will hinder a shine. If so, it is best to remove it with some rubbing alcohol and a rag. Now you are ready to begin.
I first learned how to shine shoes from my dad, but to shine them to a mirror finish, Old Cadets taught me when I attended New Mexico Military Institute. We used Kiwi there and it always worked really well for us.
How to shine: Using shoe trees helps. Lightly wet a cotton ball, dab it in the polish and work the polish into the shoe making little circles. When the cotton ball starts to make scratches, get a new one. It takes many hours to build up a base coat of polish and then have it shine like a mirror, but once you have the base coat, you can easily touch up your shoes. If you are going to make all of the shoe mirror-like, be aware that as soon as you take your first step, where the shoe naturally bends with your foot, the polish will crack and flake off. So, you may want to limit the mirror parts to the heels, the sides and as much of the toe as possible, highly shine the rest- including the tongue!
Like the Tomb Sentinel said in the video, it is all about building up a base and when you first being it will seem like it takes forever, but as you progress, it will take less and less time to shine your shoes. If your shoes have leather soles, you will be able to sand the outside of the sole and shine it with shoe polish as well. If your soles are rubber or some sort of synthetic material you will have to use edge dressing.
How to Remove Edge Dressing: After a few coats with edge dressing, you will need to strip the welt (where the sewing is) and also the sides of the sole so as not to have that buildup that eventually looks terrible. For the outside of the sole, use steel wool to scrape away excess, a putty knife works well also. For the welt, you can use the putty knife corner, but be careful. Sometimes the edge dressing will flake off or come off in small chunks. If not, you may have to use Leather Luster Remover. Sand (very fine sandpaper is best) the sole and the side heel tap (if attached) so that it is even and then reapply the Angelus Edge Dressing.
The man-made, synthetic lighter soles are not the most desirable for the military Driller but are the most prevalent. Leather soles are desirable. Make sure to blacken the sole if it is a lighter color.
Pros: Break-in period can be shorter than synthetic shoes/boots Cons: Shinning them over and over and over and over.
Side heel taps (“Cheaters” or “Clickers”) are great whether you execute closed-toe movements or use the traditional 45-degree angle. You can get different colors: silver, gold or black. Silver and black are great if you want shiny and black will need to be coated with the Angelus mentioned above. Note: if you have black and put edge dressing on them (which you should), it will chip off and you will need to strip the metal and reapply so it doesn’t ‘cake’ up. Attach them with black wood screws.
If you have cheaters that are shiny gold or silver in color, keep them shined and attach them with the same color sheet rock screws.
When attaching cheaters, you can put spacers (washers) behind them or screw them solidly into the side of the sole. Since these taps are curved, you can either match your heel curvature or put a space between the tap and the heel to see if there is better sound quality.
Horseshoe taps can be dangerous and mark up floors, but sound awesome- especially in a large formation. Ask any farrier, horseshoes need to fit a horse’s hoof exactly all the way around the hoof. Ask any cobbler, horseshoe taps don’t. As a matter of fact a cobbler usually offsets the tap into the center of the heel by 1/16 of an inch from the back and keeps a gap of 1/8 of an inch on the sides. Horseshoe tap sizes are for smaller and larger feet (heels) and nothing else.
Toe taps are excellent for creating sound marking time.
All of the taps and cheaters are available at Glendale!
poromeric, shoes, shine, mirror, corfam, corfram, taps, honor guard, drill team, cheaters, shine shoes, ceremonial shoes, poromeric, corfam, corofam, corofram, clorfram, clofam, clorofam, corpham, coropham, honor guard training, drill team training, how to shine poromeric leather shoes, how to remove heel and sole dressing
Have you considered your command voice? Have you looked at your service’s manual and actually read about what it says on the proper way to call commands? No, it doesn’t say monotone is OK, it doesn’t say the gravel-in-your-throat style is a good style, it says use inflection, be clear and more! Read! Don’t rely on a senior cadet to tell you what you need to do (as with EVERYTHING else!)- read it for yourself!
“Well, I call commands like this.” “At my school we, [fill in the blank here].” Ever hear of standardization? That is what the military is about, standardizing. Your personal style, what you may think is really cool, does not matter. Stop it.
When calling commands your voice should have inflection and NOT be monotone (some Navy cadets do this and I cannot figure out why). You should also enunciate each syllable and not leave off the first or last letter or substitute letters:
There is no such thing is “Righ, HACE“.
The USAF does allow, Forward, HARCH, (it’s in a picture, not text) the other services use MARCH.
There is no such thing as “A-Ten-Hut”, or any other number to bring a formation to Attention.
There is no need to growl your commands- that means you are calling from your throat. Stop, or you will have problems later in life.
There is no such thing is “Orward, ARCH“.
Here is a snippet from my book, The Honor Guard Manual.
•The ability of your voice to reach whatever distance necessary without undue strain.
•Voice is focused on the person farthest away.
•Assume the position of Attention, breathe properly, relax throat, open mouth and push the air out of your lungs from the diaphragm (place your hand on the top of your stomach, just under your ribcage and try to make those muscles tighten when giving commands).
•Distinct commands are effective; indistinct commands cause confusion.
•Clearly enunciate; use tongue, lips, and teeth to form words and word parts.
•Develop the ability to give clear, distinct commands. Practice giving commands slowly and carefully, prolonging the syllables. Gradually increase the rate of delivery to develop proper cadence, still enunciating each syllable distinctly.
Note: Honor Guard cadence is slow; approximately 90 beats per minute
•The rise and fall in pitch and the tone changes of the voice.
•Starting at a normal speaking voice, pronounce the preparatory command with rising inflection.
•A properly delivered Command of execution should have no inflection.
•Command of execution should have a higher pitch than the preparatory command.
•Expresses confidence and decisiveness
•Expresses knowledge of commands and proper execution
•Commands are called at the proper time and in the proper manner
So, now that you have the info, straight from the manual, you will be able to properly call commands!
This is a demo store for testing purposes — no orders shall be fulfilled.